Security roller shutters for the office at 34 Koroleva Street: A real-life case study from Odessa

In January 2026, an office located at 34 Koroleva Street in Odesa reached out to us — the building’s facade faces the street directly with several large windows lacking any additional protection. The owner wanted to secure the openings without making it look like a bunker, while effectively reducing risks in the event of a nearby blast or a break-in attempt. Calculation No. 9058423 was ready the same day, and within two to three weeks, white aluminum security shutters of the AR55 profile featuring a 55 mm slat and interior manual operation were installed on the facade.

Here is a look inside such a project, what shutters actually provide in practice, and where the boundary lies between “enhanced safety” and “complete protection.”

In Short, If You Don’t Have Time to Read Everything

Security shutters act as an additional physical barrier in front of the glass rather than a bomb shelter: they do not absorb blast waves like specialized protective structures, but they significantly reduce the risk of glass-shred injuries and deter unauthorized entry. The project at 34 Koroleva utilizes the AR55ZH profile (foam-filled aluminum, 55 mm slat), white color, exterior surface-mounted installation, and interior manual cord operation without dependence on electricity. The wind load class of the structure is CB 1a–2 (up to 22.3 m/s), which corresponds to typical wind conditions in Odesa. The estimated cost per calculation is 370.08 € for a 2630×1780 mm opening, excluding installation; the final price is determined after on-site measurements. This same logic applies not only to offices, but also to windows and doors of private houses and apartments.

Why Security Shutters Are Increasingly Installed in Odesa Beyond Aesthetics

A building’s roof and walls generally withstand impacts much better than glazing. A window is the weakest point of any facade: it shatters even from a blast wave caused by an impact a few blocks away, and flying glass shards are one of the most common causes of injuries during city shellings. Consequently, over the past couple of years, security shutters have been ordered not just by private homeowners “just in case,” but also by offices, retail stores, and apartment building management companies as a practical way to boost safety without major facade reconstruction.

What Clients Say: A Google Review

> “We ordered security shutters for plastic-metal windows in an apartment on Koroleva St, Tairova district, Odesa. The main objective was intrusion protection and extra safety amid shelling conditions.

> We contacted Oknodom, and everything was done very quickly: they promptly processed the order, manufactured, and installed the shutters on agreed dates. The installation was neat and professional.

> We are completely satisfied with the quality of the shutters, the turnaround time, and the installers’ work.

> We recommend Oknodom to anyone looking for reliable security shutters in Odesa.”

> — Liliana Bordian, ★★★★★ 5 out of 5, Google Review

The office at 34 Koroleva requested the exact same solution as the reviewer: intrusion defense plus enhanced safety during air raids. The difference lies in the type of property (office facade glazing instead of an apartment window) and, consequently, the canvas dimensions and installation layout.

Case Study: Office at 34 Koroleva — Protecting Facade Glazing

According to calculation No. 9058423 dated January 28, 2026, a single shutter was manufactured as a finished product under article ZHRLTS 2630×1780:

The blueprint illustrates how the canvas width, shaft type, and suspension are calculated long before the team arrives on-site — a standard production preparation phase for any protective shutter order.

What Shutters Actually Provide: Truth About Blast Waves

It is important not to overpromise here. An aluminum profile security shutter is neither a certified anti-impact structure nor a replacement for a shelter during a direct hit. What it genuinely accomplishes:

It establishes a physical barrier in front of the glass that absorbs the primary impact of splinters and fragments when a window shatters from a nearby explosion or detonation. It delays and complicates unauthorized intrusion, making it significantly harder and noisier to remove or force open a lowered shutter than to break a window. It restricts visibility into the interior from the street, acting as an extra deterrent.

For maximum protection, the profile can be paired with tempered or laminated glass and a reinforced (extruded) slat option — something worth discussing during the measurement phase depending on whether you are securing an apartment window, retail storefront, or office glazing.

Why This Specific Profile and 55 mm Slat

AR55 is a foam-filled aluminum profile: lightweight, offering decent thermal insulation and an affordable price tag, making it a standard choice for apartments, private homes, and offices. For shops, storefronts, and locations requiring higher strength, solid extruded profiles with stiffening ribs are preferred — they are heavier but handle higher loads. The 55 mm slat strikes a balance between canvas rigidity and system weight, making it well-suited for a 2630×1780 mm opening like the one at 34 Koroleva.

Interior Manual Operation Is a Deliberate Choice, Not a Compromise

Power outages are a regular reality in Odesa, giving the manual cord drive a practical advantage: the shutter can be lowered or raised at any moment regardless of electricity availability. For an opening of this scale, a manual mechanism is entirely sufficient while keeping costs lower than motorized setups. The controls are located inside the premises, offering both convenience and heightened security since operating the shutter from the outside is impossible.

More Than Just Offices: The Same Logic Applies to Homes and Apartments

While the Koroleva 34 case features an office, the request for “intrusion resistance plus security during shelling” applies equally to windows and balcony doors of private residences, ground-floor apartment entryways, and small storefronts. Profiles, colors, and control types are customized for each specific opening — explore more about shutter types, profiles, and installation methods in our security shutters section.

How the Ordering Process Works: From Request to Installation

Inquiry with rough dimensions → on-site measurement checking opening geometry, facade, and mounting options → approval of profile, color, and controls → manufacturing → installation and canvas movement verification. From calculation to completion for the Koroleva 34 project, the process took about two to three weeks — standard timing for a straightforward surface-mounted setup without custom modifications.

If you need to secure wide openings alongside windows — such as a garage, warehouse, or parking area — different structures and drives are utilized; learn more details in the rolling garage doors section.

Frequently Asked Questions About Security Shutters

Do shutters protect against blast waves during shellings?

Shutters do not absorb blast waves like specialized anti-impact engineering structures, but they build a physical shield in front of the glass, drastically cutting down fragment injury risks and complicating forced entry.

Can such shutters be installed on an office or shop in Odesa?

Yes. Commercial properties typically utilize reinforced extruded profiles or automated systems, but constructions based on the AR55 profile with a 55 mm slat, as seen in the Koroleva 34 case, are also well-suited for office windows and small display windows.

What should I do if there is a power outage during an air raid alert?

With manual cord operation, the shutter opens and closes by hand without requiring an electric motor — power cuts will not block access to your window.

How much do security shutters cost in Odesa?

Approximately 300–400 € for a standard window opening depending on size, profile, and hardware; exact pricing follows a complimentary on-site measurement.

How long do manufacturing and installation take?

Typically, two to three weeks from measurements to completion, depending on factory workload and opening complexity.

Helpful Information

Call for a free consultation and to schedule a surveyor:

📞 0 800 33 10 30 (free across Ukraine)
📞 096 533 34 30
📞 080 033 29 69
💬 097 033 05 65 (Viber)

Our Offices in Odesa

Main Office and Showroom:
📍 4a Zheliabova St (Peresypskyi District)
Mon–Fri: 9:00–18:00 | Sat: 10:00–15:00
📌 Google Maps Directions

Office 2:
📍 31 Generala Petrova St
Mon–Fri: 9:00–18:00
📌 Google Maps Directions

Office 3:
📍 58a Akademika Viliamsa St
Mon–Fri: 9:00–18:00
📌 Google Maps Directions

Office 4:
📍 140a Lustdorfsky Road
Mon–Fri: 9:00–18:00
📌 Google Maps Directions

Free surveyor visits across Odesa and the Odesa region. Service coverage areas: Odesa, Mykolaiv, Kherson, and their respective regions.