Glass partitions for a yoga studio at 26 Perlyna, Odesa
A yoga studio in the 26 Perlyna residential complex on Henuezka Street in Arkadia, Odesa, needed to split its space into separate rooms. Each room had to be quiet and private, and daylight from the windows still had to reach the back of the space. We installed partitions made of 10 mm tempered glass with a sandblasted pattern, in a black U-channel profile, with two double-action swing doors. Above the partitions we built a separate steel frame, because the grid ceiling could not carry glass. Glass partitions like these cost from UAH 5,700 per m², fully installed.
Below I explain how we chose the design and why each part is the way it is.
What the client needed
People in a yoga studio practise barefoot, on mats, often with their eyes closed. They do not want to see who is walking down the corridor or feel like they are in a shop window. Solid walls, on the other hand, would make the rooms dark and cramped, and in a space like this light and air matter as much as quiet.
The second requirement was about the doors. Visitors walk in carrying mats and water bottles, so the doors had to open easily in either direction and close by themselves, so they never stay ajar during a class.
The third requirement was technical. The ceiling is an open-cell grid ceiling, and that kind of ceiling cannot hold the weight of glass.
What we installed

| Item | What we installed |
|---|---|
| Glass | tempered, 10 mm, satin with a sandblasted pattern |
| Profile | U-channel along the perimeter, framing the door openings |
| Doors | 2 double-action swing doors, glass, with closers |
| Profile and hardware colour | black, powder-coated |
| Joints between panels | filled with silicone |
| Ceiling frame | 40 × 40 mm steel tube with drops to the concrete slab, painted, bolted |
| Site | yoga studio, 26 Perlyna residential complex, Henuezka St, Arkadia, Prymorskyi district, Odesa |
| Price | from UAH 5,700 per m², fully installed |
Why 10 mm glass
The panels here are tall and wide, and the doors swing both ways many times a day. 10 mm glass is stiffer than 8 mm: it does not vibrate when the doors close, and it holds the load better where the hardware is fixed. For offices and commercial spaces with large panels we normally use 10 mm.
All the glass is tempered. If it breaks, it falls into small blunt pieces, which is a must in a room where people walk barefoot.
Why a sandblasted pattern
The glass is matte with clear horizontal stripes. The pattern is made by sandblasting: the matte areas let light through but blur silhouettes, and the clear stripes keep a sense of depth. The stripes sit so that the glass stays matte at body height, and nobody can look into the room. At the same time the glass wall does not look like one flat white surface, and the room does not feel small.
Sandblasting changes the surface of the glass itself, it is not stuck on top. The pattern will not peel off like film, and it will not wear away with cleaning.

Why a black U-channel and silicone joints
The U-channel holds the glass along its edges: on the floor, under the frame at the top, and at the walls. We used the same profile to frame the door openings, so the doors look like part of one system rather than separate panels.
There is no profile between the panels themselves. The joints are filled with silicone, so the wall reads as one glass surface with thin lines.
We powder-coated the profile and all the hardware black. Powder coating is baked in an oven, lasts for years and does not chip where people touch it every day.

Why double-action doors
Double-action doors open both ways and return to the closed position by themselves. Someone carrying a mat can push them with a shoulder in either direction, and the closer shuts the door smoothly, without a bang. The doors never stay ajar, and corridor noise does not get into the room mid-class.


Why a separate steel frame
A grid ceiling is decorative. It carries only its own weight and the lights. One square metre of 10 mm glass weighs about 25 kg, and it cannot hang from a ceiling like that.
So above the partitions we built a frame of 40 × 40 mm steel tube with drops down from the concrete slab. The frame is painted and bolted together, so there was no welding or smoke in the finished interior. The glass stands on the floor and is fixed at the top to this frame, not to the ceiling.

How the job went
We handled the project from the first survey to handover.
- Survey. Our technician measured the openings, checked how level the floor was and the height to the slab above the grid ceiling.
- Drawings. We agreed with the client how the walls would be split into panels, where the doors would go and how the stripes would line up across all the walls.
- Production. The glass was cut, sandblasted and tempered. The profile and hardware were powder-coated black.
- Frame. We installed the steel frame under the ceiling with drops to the slab.
- Installation. We fitted the U-channel, the glass and the doors with closers, filled the joints with silicone and adjusted the doors.
The client specifically mentioned that our team was always in touch and kept an eye on every stage. On a commercial site that matters as much as the glass, because every day of downtime costs money.
What the client said
Review by Yevhenii Shchebrov on our Google Maps page, 5 stars. The original is in Russian, below is our translation:
“We had glass partitions and tempered glass doors made for a yoga studio at Kadorr, 26 Perlyna. OKNODOM took care of every stage, from measurements and drawings to installing the glass, painting the hardware and fitting the door closers. Everything was done on time and without a single mistake; the quality of the glass and the fit of the details are excellent. I especially liked that the company’s specialists were always in touch and checked every stage. I recommend OKNODOM to anyone looking for professional installation of glass partitions and doors in Odesa!”
OKNODOM is the Russian-language name of our company; in Ukrainian it is Viknodim.
This project on our social media: YouTube Shorts, Facebook, Instagram, TikTok.
What to consider if you are planning glass partitions in an office or studio
- Ceiling. Suspended, grid or Armstrong ceilings cannot hold glass. Ask your contractor what the top of the partition will be fixed to. A frame up to the slab should be in the quote from the start, otherwise it becomes an extra charge during installation.
- Privacy. Clear glass does not suit offices and rooms where people do not want to be seen. A sandblasted pattern or matte glass solves this for good. Film is cheaper, but its edges can lift over time.
- Doors. Where people walk through all day, double-action doors with closers are easier than doors that open one way. They need 10 mm glass and matching hardware, so decide on the door type before production.
- Colour. A black profile and hardware look modern, but order the coating together with the glass so that everything arrives in the same shade.
- Price. Compare fully installed quotes that already include the frame, coating, doors, delivery and installation. A price per square metre of glass without these items tells you nothing about the final total.
More of our glass and partition projects are in the Partitions section, including toilet cubicles and shower partitions made to size for a warehouse in Ovidiopol. Prices and glass options are on our glass partitions page (in Ukrainian), and we also make custom glass shower enclosures with the same tempered glass and hardware.
Questions we hear most often
How much do glass office partitions cost, fully installed?
Glass partitions cost from UAH 5,700 per m², fully installed. The total depends on the glass area, thickness and finish, the number and type of doors, the hardware colour, and whether a ceiling frame is needed. We give a preliminary quote from dimensions and photos and fix the exact price in the contract after the survey.
Can a glass partition be fixed to a suspended ceiling?
No. Suspended, grid or Armstrong ceilings carry only their own weight and the lights. Glass needs support from the concrete slab: an embedded fixing or a steel frame with drops, as on this project.
Why is a sandblasted pattern better than film?
Sandblasting changes the glass surface itself, so the pattern does not peel, bubble or wear off with cleaning. Film is cheaper and can be removed, but its edges can lift over time, especially on doors that people touch all day.
What are double-action doors?
They are doors that open both ways and return to the closed position by themselves thanks to a closer. They work well where people walk back and forth carrying things: studios, offices, clinics.
Can glass partitions have a black profile?
Yes. We powder-coat the profile and hardware black or any other RAL colour. The coating is ordered together with the glass, so it is best to agree on the colour at the drawing stage.
Order glass partitions from Viknodim
Send us the room dimensions, a floor plan or photos on Viber, or call 0 800 331 030 or +380 96 533 34 30, and we will prepare a preliminary quote. The survey in Odesa is free. We work under a written contract with a warranty and after-sales service, and offer 0% instalments over 3 months.
Our showrooms in Odesa:
- 4a Vladyslava Dombrovskoho St (formerly Zheliabova), head office, 0 800 331 030, +380 96 533 34 30
- 2 Vladyslava Buvalkina St, Kotovskoho settlement, +380 66 690 96 96
- 31 Akademika Filatova St, +380 99 518 49 32
Author: Illia Kaprishanskyi, glass structures installation and production, Viknodim.


