Corner Shower Enclosure in Odesa: A Lenposelok Case Study — 8mm Glass, Turnkey for UAH 33,000

In Short. On Mohylivska Street in Lenposelok (Odesa), we assembled and installed a custom frameless corner shower enclosure made of 8 mm tempered glass using Hydel hardware. The three glass panels measure 1118×1992 mm, 650×1982 mm, and 626×1987 mm, with the door swinging inward, and the installation axis offset by 6 mm outward from the tile grout line. The turnkey structure cost 33,000 UAH, taking less than two weeks from measurements to the final silicone seal. Below is a full breakdown of the case study featuring technical drawings, hardware specs, and a customer review.

My name is Yulii Illich Kaprishanskyi, and I manage the glass structures division at Oknodom. Nearly all requests for shower enclosures, partitions, and glass across Odesa and the region go through me, and this project is one of those where the client left a review just hours after installation while the impressions were still fresh. Therefore, I will break it down in detail: what was requested, why this specific design was chosen, and how much it actually cost.

The Request from Lenposelok: A Corner, a Small Bathroom, and No Desire to Deal with Shower Curtains

The bathroom layout is typical for Lenposelok housing: a corner shower area with pre-laid tiles, where the client needed to enclose the corner with glass rather than a ring-hung curtain. The request was straightforward in phrasing and familiar to us: “build a glass enclosure in the corner that looks neat and doesn’t swing open awkwardly.” Such requests typically mask three core requirements—tight sealing, a clean aesthetic free of visual clutter from bulky frames, and durability to withstand daily door pushes without wobbling within six months.

The surveyor’s visit established an installation axis of 1811×630 mm along the corner—a compact size typical for Odesa’s older Soviet-era apartment blocks and 1970s–1980s constructions in the area. At these dimensions, the difference between a precise installation and a sloppy one is glaringly obvious: when space is tight, every millimeter of gap between the glass and the tile stands out immediately.

Why a Swing Door Instead of a Sliding System

We immediately advised the client against a sliding door system, and here is why. Sliding setups rely on top and bottom tracks, which inevitably accumulate lime scale and moisture over time that is nearly impossible to clean without dismantling the unit. In a small bathroom with limited airflow, this leads to black mold forming in the grooves within a year or a year and a half. A swing door on G-432 hinges completely avoids such tracks: a single panel on hinges with a perimeter gasket can be easily wiped down with a regular sponge.

A swing door has only one drawback: it requires space to open. In this case, the 650 mm door swings inward—a decision dictated by the fact that a washing machine stands directly outside the enclosure, and outward-opening doors would have collided with it. This is standard practice: the opening direction is always customized to fit the specific bathroom rather than chosen by default.

8 mm Glass: When 6 mm Is No Longer Enough

The short answer: For fixed panels wider than 600 mm and doors subjected to daily manual pushing, we install tempered glass starting from 8 mm thick—which is what we did for this project.

While 6 mm glass works fine for narrow fixed segments or stationary partitions with no hinge load, adding door hinges, a handle-bar, and daily manual handling (sometimes pushed with a shoulder) causes 6 mm glass to flex noticeably, putting excessive wear on the hardware over time. Tempered 8 mm glass with polished edges is the industry standard for swinging shower doors that we apply by default unless a lightweight structure is explicitly requested. In this case, all three panels—both fixed and swinging—were crafted from identical 8 mm glass to ensure a uniform look without visible thickness discrepancies viewed at an angle.

Components and Hydel Hardware: What Keeps the Door Secured

According to the hardware specifications, the system uses Hydel line components in a chrome finish (the aesthetic and tarnish-resistant finish commonly referred to colloquially as “stainless steel look”). The kit for this enclosure includes:

• G-432 Hinge — 2 pcs.
• G-2728 Handle-bar — 1 pc.
• Stiffening bar (30×10 mm tube, 2000 mm) — 1 pc., offset
• OF-WS-4 Connector — 1 pc.
• OF-WS-16 Connector — 2 pcs.
• OF-WS-18 Connector — 1 pc.
• U-profile 12×18 mm, 3000 mm — 3 pcs.
• End cap for 12×18 profile — 1 pc.
• HDL-204 Gasket — 1 pc.
• HDL-210 Magnetic Gasket — 1 pc.
• HDL-206 Gasket, 800 mm — 1 pc.
• Acrylic threshold 5 mm, 800 mm — 1 pc.
• Silicone water deflector — 1 pc.

The stiffening bar here is not just decorative: in a corner configuration lacking an upper track, it prevents the large fixed panel (1118×1992 mm) from shifting when the neighboring door is opened. The HDL-210 magnetic gasket sits at the junction between the door and the fixed wall, serving as the primary defense against water leaks when correctly fitted to the glass thickness.

Enclosure Technical Specifications

Lenposelok Installation: Measurements, Axis, and Threshold

Floor installation requires precise positioning of the mounting axis—in this case, offset 6 mm outward from the floor tile joint as indicated on the surveyor’s drawing. Shifting this axis by even a couple of millimeters would misalign the threshold relative to the joint line, creating a gap that cannot be cleanly disguised with silicone. Therefore, floor marking is the stage of installation where rushing proves most costly.

The workflow is standard: surveyor visit → drawing with installation axis → glass fabrication and profile cutting to size → sealant-bonded mounting of U-profiles and threshold → hanging the door on G-432 hinges → vertical and gap alignment → final silicone edge sealing. The timeline from request to finished enclosure spans roughly 10–14 days, with the on-site installation taking just one working day.

How Much Does a Corner Shower Enclosure Cost in Odesa: The 33,000 UAH Breakdown

This total covers everything: 8 mm tempered glass for all three panels, a full set of Hydel hardware (hinges, handle, stiffening bar, connectors, gaskets, threshold), surveyor dispatch, custom manufacturing, delivery, and installation with sealing. This is not a starting price for the cheapest available option—it reflects this exact configuration measuring roughly 1.8×0.63 m with 8 mm glass and a swing door. Pricing fluctuates based on the enclosure perimeter, glass thickness (6 mm is cheaper, 10 mm is more expensive), opening mechanism (sliding systems typically cost more than swing doors due to tracks and rollers), and hardware brand.

Customer Review: Yevhen Lavshuk on the Lenposelok Enclosure

The client posted a 5-star Google review just hours after installation, accompanied by four photos of the completed enclosure inside the bathroom:

“Good day. I want to sincerely thank Oknodom (Odesa) for their excellent work! We ordered a glass partition (shower enclosure) for our bathroom. Everything was executed at the highest level: from measurements and consultation to installation. The team worked neatly, professionally, and on time. The glass is installed perfectly, looking very stylish and high quality. It’s clear that the company values its clients and treats its work responsibly. I definitely recommend Oknodom to anyone looking for quality glass structures. Thank you for the great result!”
— Yevhen Lavshuk, Google Review, 5★

The photos highlight the hardest element to execute cleanly in a corner setup: an even, consistent gap between the profile and tiles across the entire height, paired with a clean silicone bead free of overflow bumps.

Frequently Asked Questions About Corner Shower Enclosures

How much does a corner shower enclosure cost in Odesa?

For this case, it is 33,000 UAH turnkey for an enclosure measuring approximately 1.8×0.63 m with 8 mm glass and Hydel hardware. Smaller perimeters or 6 mm glass reduce the cost, while sliding systems or thicker glass (10 mm) increase it.

Which glass thickness is better for a shower enclosure—6 mm or 8 mm?

6 mm is sufficient for narrow fixed segments free from hinge stress. For daily-use doors and panels wider than 600 mm, we recommend 8 mm as it flexes less and preserves hardware longevity.

How long do manufacturing and installation take for a corner shower enclosure?

Typically 10–14 days from measurement to completion. On-site installation takes one working day.

Can I order a sliding door instead of a swing door?

Yes, but for small bathrooms we usually recommend a swing system: it lacks a bottom track where scale accumulates and looks cleaner in compact spaces. Sliding systems are better suited when there is physically no floor space outside the enclosure for a door to swing open.

What is included in the turnkey price?

Glass, all hardware, surveyor visit, custom manufacturing to size, delivery, and installation with silicone sealing. Extra charges only apply for non-standard shapes, tinted or colored glass, or premium hardware tiers.

Order a Corner Shower Enclosure from Oknodom

We manufacture custom shower enclosures of any shape—corner, straight, U-shaped—from tempered glass, and also sell glass sheets separately if you only need panel replacements. If you are exploring complete glass solutions for your bathroom alongside the enclosure, check out our aluminum partitions. Real client feedback can be found on our “Customer Reviews” page, while company background and warranties are detailed under “About Us”.

To get a quote tailored to your dimensions, call 0 800 33 10 30 or leave a request—surveyor visits across Odesa are free of charge.